What Is a Temporary Power Pole?
It is a standalone pole, set in the ground or on a base, carrying a meter socket and a breaker panel so a job site has power before the building itself is wired. Crews run extension cords or temporary circuits off it for saws, lights and pumps. A 200 amp temporary power pole is the common size for a home build or a mid-size commercial job in Tinley Park; smaller remodels sometimes get by with less. Placement matters. The pole has to sit where the utility can reach it and where trucks will not clip it during grading. If you are also running light tower rental equipment or a storage container rental office trailer, plan the pole location before the containers land, not after. We coordinate this the same way we coordinate a roll-off dumpster rental drop zone, so nothing gets boxed in once the site fills up.
Installing a Temporary Power Pole: What Does It Involve?
Installation starts with the electrician setting the pole and panel, then the utility inspecting and connecting service, then final energizing. Timelines depend on the utility's schedule more than ours, so order early on any project that also needs temporary fence rental or porta potty rental in Tinley Park for crew facilities. On active job sites, OSHA 1926.51(c) sets toilet counts by crew size, and OSHA 1926.404(b)(1)(ii) requires ground fault circuit interrupter protection on the temporary circuits your power pole feeds, so make sure your electrician's panel is GFCI-equipped before the first cord gets plugged in. We deliver temporary power pole equipment on the same run as our porta john rental units when a site needs both, which saves a trip charge for you. Sites 5.7 miles northeast in Oak Forest and 6.9 miles southwest in Mokena get the same coordinated scheduling.
Temporary Power Pole Requirements: What Should I Know Before Ordering?
Requirements vary by utility and by parcel, and we have not verified specific Tinley Park permit rules for power pole placement, so confirm those with the city before your electrician sets the pole. What we can confirm is site logistics: keep clearance around the pole the way you would for a roll-off dumpster rental delivery, since a loaded truck needs about 60 feet of straight approach to place equipment near it without backing into overhead lines. If your project also needs sanitation, OSHA 1926.51(a)(1) requires an adequate supply of potable water at the site, which is why crews often pair a power pole order with a handwashing station rental or a portable sink rental near the break area. For jobs running months, not weeks, ask about monthly porta potty rental pricing so the sanitation budget lines up with the power timeline.
How much does a temporary power pole installation cost?
We do not have a verified price band for power pole installation itself, since that is typically billed by your electrician and the utility, not by us. What we quote is the site services around it: delivery fees for related equipment run from a low daily rate to a higher monthly rate depending on distance and duration.
How long does temporary power pole installation take?
It depends on the utility's inspection queue more than the physical setup. Electricians can usually set the pole and panel in a day. Energizing depends on when the utility inspector comes out, which can add days or weeks depending on season and backlog.
Do I need a permit for a temporary power pole in Tinley Park?
Likely yes, but we have not verified the specific Tinley Park permit process for power pole placement, so check with the city before scheduling your electrician. Permitting for dumpster permit requirements and porta potty permit requirements on the same site often move through the same office, so ask about all three together.
Can I get a temporary power pole and porta potty delivered together?
Yes. We regularly coordinate drop-off of standard porta potty rental units alongside other site equipment so your electrician and your crew both have what they need on day one. Bundling deliveries also cuts down on separate trip charges across your site setup.
What size power pole do construction sites usually need?
Most residential and mid-size commercial builds in Tinley Park use a 200 amp temporary power pole. Larger commercial sites may need more; check with your electrician and review OSHA portable toilet requirements at the same time since crew size drives both power and sanitation needs.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.